WhatsApp · +1 786-546-6546
ALUCONIUMFACADE & GLASS SYSTEMS
Custom Mirrors & Decorative GlassOur project · International

Custom Mirrors & Glass Backsplashes in Miami

Custom mirrors, mirror walls, back-painted glass kitchen backsplashes and decorative glass for Miami homes, cut to size and installed.

Mirrors
Clear, bronze, gray, antique
Edges
Polished or beveled
Backsplash
Back-painted, any color
Extras
LED, defogger
Residential division

About custom mirrors & decorative glass

Mirrors and glass are the quickest way to transform a room. A full mirror wall doubles the space of a gym or dressing room; a back-painted glass backsplash gives a kitchen a seamless, easy-clean surface in any color.

We cut every piece to size, polish or bevel the edges, make the cutouts for outlets and fixtures, and install with the correct adhesives and fixings.

Custom Mirrors & Decorative Glass systemOur project · International
How it is built

Anatomy of custom mirrors & decorative glass

  1. Mirror glassSilvered mirror to ASTM C1503, in clear, low-iron, bronze, gray or antique finishes.
  2. Edge workPolished, beveled or mitered edges, with sealed edges for long life in bathrooms.
  3. Back-painted backsplashLow-iron glass painted on the back in any color, tempered behind cooktops.
  4. Safety backingSafety film on mirrors in gyms and high-traffic areas.
  5. MountingMirror mastic, clips or channels compatible with the mirror backing.
Custom Mirrors & Decorative Glass architecture
Custom Mirrors & Decorative Glass

Glass that is measured, made to size and installed to a commercial standard.

Codes, testing & approvals

Performance standards

Architectural glass is chosen by safety, strength and clarity. These are the standards and glass types behind our doors, walls, showers and mirrors.

CPSC 16 CFR 1201 / ANSI Z97.1

Safety glazing standards for glass in doors, showers, sidelights and other hazardous locations.

ASTM C1048 · Heat-treated glass

Fully tempered glass is about four times stronger than annealed glass and breaks into small, blunt pieces.

ASTM C1172 · Laminated glass

Two or more plies bonded by an interlayer that holds the glass in place if it breaks; used where retention matters.

ASTM C1503 · Mirrors

Quality standard for silvered mirror glass, with edge sealing and compatible adhesives for long life.

ANSI/BHMA A156.10 / A156.19

Standards for power-operated sliding doors and low-energy automatic swing doors.

Accessibility (ADA / FBC)

Clear opening width, low thresholds and limited opening force on accessible doors.

Code references are summarized for orientation. Final requirements are confirmed by the engineer of record and the building department for each project.

For architects & designers

Design considerations

What our engineering team reviews with the design team before the drawings are final.

  1. Measure preciselyOutlets, switches and fixtures are measured before cutting; glass cannot be trimmed on site.
  2. Use the right adhesiveOnly mirror-safe adhesives are used, so the silver does not discolor.
  3. Heat near cooktopsTempered glass and the cooktop maker's clearances are used behind ranges.
  4. LightingBacklit and front-lit LED mirrors are planned with the electrician.
Custom Mirrors & Decorative Glass detail 1
Compare

Glass types compared

A quick reference our engineers use with architects and owners when choosing the right system.

AnnealedHeat-strengthenedFully temperedLaminatedLow-iron
StrengthBaseAbout 2x annealedAbout 4x annealedDepends on pliesSame as base type
BreakageLarge sharp shardsLarge pieces, stays in frameSmall blunt piecesHeld by the interlayerAs base type
Typical useMirrors, framed artLaminated facades, spandrelsDoors, showers, partitionsRailings, overhead, securityShowers, back-painted walls, clear railings
Scope of supply

What we supply

Everything from the first measure to the final clean, in one price.

  • Custom-cut mirrors and mirror walls
  • Back-painted glass backsplashes
  • Bronze, gray and antique mirrors
  • Beveled and polished edges
  • Cutouts for outlets and fixtures
  • Installation by licensed and insured installers
Options

Options & specifications

Final glass and hardware are confirmed with you before production.

MirrorClear, low-iron, bronze, gray or antique
BacksplashBack-painted glass in any color; tempered behind cooktops
EdgesPolished, beveled or mitered
ExtrasLED backlighting and defogger pads
How it works

From photos to installation

  1. Photos or a visitSend a few phone photos or drawings, or book a visit. We ask the right questions up front.
  2. Free quoteA clear, itemized price for glass, hardware, finish and installation.
  3. Site measureOnce you approve, we measure on site so every panel is made to size.
  4. ProductionTempered or laminated glass and hardware are produced to your measurements and finish.
  5. InstallationLicensed and insured installers fit, seal, clean and walk you through the result.
Questions

Custom Mirrors & Decorative Glass: FAQ

Can glass be used behind a stove?

Yes, using tempered back-painted glass with the clearances the cooktop manufacturer recommends.

Can you match a paint color?

Yes. We match a paint brand code or a sample, and show you a color sample before production.

Can you make a full mirror wall for a home gym?

Yes. We install large mirror panels with safety backing and polished joints for a seamless look.

Is a glass backsplash easy to clean?

Yes. It is one smooth surface without grout lines, which is why it is popular in modern kitchens.

Free quote

Get your free custom mirrors & decorative glass quote

Tell us what you have in mind and add a few photos. We reply with questions or a price.

  • Free, no-obligation quote
  • Price from phone photos, before any visit
  • Itemized price for glass, hardware and installation
  • Licensed and insured installers

Prefer to message or talk?

Up to 8 MB total.
WhatsApp